EL(FL) Eng 5.QXP 7/11/2013 11:04 AM Page 47
Driving your vehicle
✽
NOTICE
The DBC does not turn ON in the P
ESS : Emergency Stop Signal Trailer stability assist (TSA)
The Emergency Stop Signal system (if equipped)
�
(Park) position.
alerts the driver behind by blinking the
stop light when the vehicle suddenly
stops or when the ABS activates in a
stop. (The system activates when the
vehicle speed is over 55km/h and the
vehicle deceleration is over 7m/s² or the
ABS activates when the vehicle emer-
gency braking.)
Trailer stability assist is operated as vehi-
cle stability control system. Trailer stabili-
ty assist system has an effort to stabilize
the vehicle and trailer when the trailer
sways or oscillates. There are various
reasons making vehicle sway and oscil-
late. Almost case it happens at high
speed however, if the trailer is affected by
crosswinds, buffeting, and improper over-
loading, it may be a risk of swaying.
�
�
�
�
The DBC may not activate if the ESC
(or BAS, if equipped) is activated.
Noise or vibration may occur from the
brakes when the DBC is activated.
The rear stop light comes on when the
DBC is activated.
In a very steep hill even though the
brake pedal or accelerator pedal is
depressed the DBC may not deacti-
vate.
Always turn OFF the DBC on normal
roads. The DBC might activate from
the standby mode when abrupt corn-
ing or driving through speed bumps.
DBC may activate and cause the
engine to stop in vehicles with manual
transaxle if you drive in 3rd gear (or
above) with DBC on. Do not turn on
DBC when driving in 3rd gear (or
above).
When the vehicle speed is under 40 km/h
and the ABS deactivates or the sudden
stop situation is over, the stop light will
not blink. Instead, the hazard warning
flasher will turn on automatically.
�
�
Factors of swaying such as:
-
-
High speed
Strong crosswinds
The hazard warning flasher will turn off
when the vehicle speed is over 10km/h
after the vehicle has stopped. Also, it will
turn off when the vehicle drives at low
speed for some time. You can turn it off
manually by pushing the hazard warning
flasher switch.
- Improper overloading
- Sudden controlling of steering wheel
-
Uneven road
CAUTION
The Emergency Stop Signal system
will not work if the hazard warning
flasher is already on.
5
47
| Categories | Hyundai Manuals, Hyundai ix35 Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, ix35 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)