THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
27
To Shut Off the Passen ger Airb ag
3. Place the ignition key in the Passenger Airbag ON/
OFF Switch, press inw ard and turn the key to the left to
the ON position. This will turn on the passenger airbag.
1.
2.
3.
Turn ignition to OFF position.
2
Remove the water-resistant plug.
4.
Reinstall the water-resistant plug.
Place the ignition key in the Passenger Airbag ON/
NOTE: Do not turn the Passenger Airbag ON/ OFF
Switch on or off with the ignition in the ON/ RUN or
START positions, as the ACM could cause the “Airbag
Warning Lamp” to illuminate.
OFF Switch, press inw ard and turn the key to the right to
the OFF position. This will shu t off the passenger airbag.
4.
Reinstall the water-resistant plug.
NOTE: When the Passenger Airbag ON/ OFF Switch is
in the OFF position, a ind icator light will illuminate when
the ignition is ON. If the ind icator light does not illumi-
nate for 3 second s after the ignition is turned ON, or
when the Passenger Airbag ON/ OFF Switch is turned
OFF (while ignition is in the ON position), have an
authorized dealer service the system immediately.
If A Deploym ent Occurs
The airbag system is designed to deploy when the impact
sensors detect a moderate-to-severe frontal collision, to
help restrain the driver and right front passenger, and
then to immediately deflate.
NOTE: A frontal collision that is not severe enou gh to
need airbag protection will not activate the system . This
does not mean som ething is wrong with the airbag
system .
To Turn On the Passen ger Airb ag
1.
2.
Turn ignition to OFF position.
Remove the water-resistant plug.
| Categories | Jeep Manuals, Jeep Wrangler Manuals |
|---|---|
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)