Interior equipment, trunk
125
Trunk, Coupé and 5-door
WARNING
When the back seat has been put back in place, make certain that
the belt beam is locked firmly on both sides (the red warning tabs
mustgodown).Thisisvitalsincetheupperanchoragesforthe
safety belts are located in the belt beam. The belts will not
restrain a rear seat occupant if the belt beam is not properly
latched.
Whenthe entire rear seat hasbeen lowered, youmustremove the
rear window shelf. Otherwise it could come loose and cause per-
sonal injury during a collision.
Lowering the entire rear seat
To lower the rear seat, the front seats must be moved forward if they
are in the most rearward position. The seat back must be almost ver-
tical.
Trunk lid lock
Unlock the trunklid by pressing the lowerbutton on the remotetrans-
mitter, by pressing the remote release button on the driver’s door or
by using the key. The alarm horn sounds three times and the lights
flash when the trunk is released with the remote control.
1
Flip up the seat bottom by pulling the loops located between the
backrest cushions and seat cushions.
2
3
Rest the seat cushions on edge just behind the front seats.
Programming features, see page 231.
Release the entire backrest cushion, including the belt beam, by
pressing in the latch in the handle on the left (driver’s) side. After
this has been done, the fact that the belt beam has been
releasedisindicatedbythe red"warning tabs"poppingupon the
right and left sides of the beam. For increased load capacity with
the backrestcushion down,removethe rear seat head restraints
(5).
| Categories | Saab 9-3 Manuals, Saab Manuals |
|---|---|
| Tags | Saab 9-3 M2000 |
| Model Year | 2000 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)