182
Car care
1
2
Retaining screw
Side-mounted turn signal
Turn signal bulb
1
2
3
Slide the lens forward so that its rear part can be pulled out.
Change the bulb.
When refitting, make sure that the groove in the spring engages
theedgeof the bodypanelandthat therubber gasketis correctly
positioned.
Front turn signal bulb
To change the bulb, the complete lamp unit has to be removed.
1
2
3
Loosen the screw (1). There is no need to remove it completely.
Carefully remove the complete lamp unit.
Grasp the two plastic tabs and turn the bulb holder counterclock-
wise.
4
5
6
Pull the bulb holder out of the lamp unit and change the bulb.
Check that the new bulb is firmly in place and has good contact.
When mounting the lamp unit, see that the two guide lugs on the
rear edge of the unit come inside the edge of the body panel.
7
Insert the lamp unit in towards the headlight and see that the
front bracket comes under the screw. Tighten the screw (1).
| Categories | Saab 9-3 Manuals, Saab Manuals |
|---|---|
| Tags | Saab 9-3 M2000 |
| Model Year | 2000 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)