Instruments and controls
67
Using DIST as a trip meter
To calculatethe arrival time if aspecified
average speed is maintained
Calculating the requisite average speed:
If no value has been set for the DIST func-
tion, DIST will now function as a trip meter
(indicated by an arrow on the far right of the
display).
1
Press
to select DIST.
1
Select DIST using the
button.
2 Hold the SET button for two seconds.
2 Hold the SET button for two seconds.
3
4
Set the distance to be covered using
Press CLR to reset the trip meter.
3
4
Setthe distancetobe coveredusing
Under 1000 miles the distance will be
shown in increments of 0.1 miles,
there-after, the reading will change in incre-
ments of 1.0 miles.
or
.
or
.
Press SET to store settings.
Press SET to store settings.
5
6
Press to select ARRIV.
Hold the SET button for two seconds.
Metric units: for just under a kilometer, the
distance will be shown in increments of
5 Press
to select SPD Ø.
6
7
Hold the SET button for two seconds.
Set the average speed you intend to
10
meters, there-after, the reading will
7 Set the desired arrival time using
.
or
change in increments of 100 meters.
When DIST is functioning as a trip meter,
the ARRIV function will display the current
time.
drive at using
or
.
8
Press SET to display the average speed
you need to maintain to arrive at the
desired time.
8 Press SET to display the estimated
arrival time.
At the beginning of a journey, the SPD Ø
and ARRIV functions will display current
values. If values are set during the journey,
the new values will be displayed after a
delay of about 10 seconds.
At the beginning of a journey, the SPD Ø
and ARRIV functions will display current
values. If values are set during the journey,
the new values will be displayed after a
delay of about 10 seconds.
| Categories | Saab 9-3 Manuals, Saab Manuals |
|---|---|
| Tags | Saab 9-3 M2000 |
| Model Year | 2000 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)