Car care
181
Changing bulbs
WARNING
Before changing a bulb in the engine bay, switch off the engine
to avoid the danger of fingers and hands being injured by
moving parts.
The radiator fan can cut in evenwhen the engineis switched off.
NOTE
Switch off the ignition before changing a bulb, to avoid possible
short-circuiting.
1
2
Headlight bulb
Parking-light bulb
Headlight
IMPORTANT!When changing bulbs, usethe same typeof bulb,
(e.g. Long-life).
Headlight aiming, see page 208.
1
2
3
4
5
Unscrew the cover from the back of the light units.
Unplug the connector.
Unhook the spring clip by pushing it forward and then to the side.
Remove the bulb.
Insert the new bulb, without touching the glass with your fingers.
Line it up so that the three lugs fit into the corresponding slots in
the reflector and secure it with the spring clip.
Parking lights
The parking-light bulb is fitted in the same light unit as the headlight
bulb.
1
2
Remove the bulb holder from the lamp unit.
Then take the bulb out of the holder.
NOTE
Do not fit bulbs with a rating above 60/55W, since the headlight
reflector and the wiring of the car are not designed for a higher
wattage.
Do not touch the glass of the bulbs with your fingers. The oil on
your skin can shorten the life of the bulb.
| Categories | Saab 9-3 Manuals, Saab Manuals |
|---|---|
| Tags | Saab 9-3 M2000 |
| Model Year | 2000 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)