148
Starting and driving
Cruise Control
Temporary increase in speed
Press the accelerator to override the preset
speed, e.g. for overtaking.
When you release the accelerator, the
system will revert to the preset speed.
WARNING
•
•
Do not use the Cruise-control system
on wet or icy roads, in dense traffic or
on winding roads
To cancel temporarily
Move the control stalk to CANCEL
(spring-loaded position before OFF posi-
tion). This will disengage the system but the
preset speed will be retained in the system
memory. (The memory is deleted when the
engine is switched off.)
To preventthe system beingactivated
inadvertently, set the control to OFF
when you do not want to use the
system
To re-engage the system
The system is operated by means of the
controls on the stalk switch:
To set the desired speed
To revert to the preset speed, slide the
switchtoRES/–.Thiswillonlyoperatewhen
the car’s speed is above 25 mph (40 km/h).
Move the switch to ON. Accelerate to the
desired speed (minimum speed: 25 mph
(40 km/h) and press SET/+.
•
OFF(system is disconnected; the system
is always in the OFF position when the
engine is started).
To reduce the preset speed
The cruise-controlsystem will always disen-
gage automatically the moment that either
the brake pedal or the clutch pedal is
depressed.
To increase the preset speed
Accelerate to the desired speed and press
SET/+.
You can also increase the speed of the car
using the SET/+ button. Press it once to
increase the speed by 1 mph (1.6 km/h) or
hold it in and release when the desired
speed is reached.
•
•
•
ON (system switched on).
SET/+ (to set the desired speed).
CANCEL (cancel operation of system,
e.g. to reduce speed temporarily).
It is also possible to reduce the speed by:
•
RES/– (resume preset speed).
•
Sliding the button to RES/– once will
reduce the speed by 1 mph (1.6 km/h).
When the system is ON, the CRUISE indi-
cator light will appear on the main instru-
ment panel and will be extinguished when
the system is switched OFF. If CANCEL is
selected, CRUISE will flash off once.
•
Holding the button in the RES/– position
will effect a gradual reduction in speed
until the button is released.
| Categories | Saab 9-3 Manuals, Saab Manuals |
|---|---|
| Tags | Saab 9-3 M2000 |
| Model Year | 2000 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)