38
Security
Overview of functions
Battery for
The battery for the remote control will normally
remote control have a life of 4-5 years. When the battery needs
changing, ”REPLACE KEY BATTERY” will
appear on the SID.
After fitting a new battery, press the unlock but-
ton on the remote control at least four times in
succession, so that the car alarm can recognize
the signals from the transmitter.
Locking/
Hazard warning lights flash once (0.5 seconds).
Horn chirps once.
The LED will come on for 10 seconds.
activation
Unlocking/
deactivation
Hazard warning lights flash twice.
Horn chirps twice.
The LED will come on for two seconds.
If the remote control has been exposed to very
low temperatures, it may not function properly. If
this happens, warm it in your hands for a few
minutes.
If the remote control is not working, it may be
because the code signal has not been synchro-
nized with that in the control module for the car
alarm. To rectify this, press the unlock button on
the remote control at least four times in quick
succession. When it is recognized, the door
locks will cycle.
Unlocking/
Hazard warning lights flash three times.
deactivation of Horn chirps three times.
trunk lid alarm The LED will flash three times per second for 10
seconds.
Alarm triggered Hazard warning lights flash for 5 min.
Siren wails for 30 seconds.
To switch off the alarm, deactivate the system in
the normal way (unlocking) by unlocking the
door with the key or the remote
Window-glass
sensor
The sensor detects if any window is broken and
triggers the alarm.
To disable the sensor, see page 36.
Car-battery
voltage
If the car-battery voltage is lost while the alarm is
activated - for instance, if the battery has died -
the car alarm will be deactivated. Once battery
voltage is present again, the alarm will revert to
its status at the time the voltage went down.
If the battery is disconnected, e.g. in an attempt
to break into the car, the alarm will be triggered
Remote control The range of the remote control is normally
yds. (5-10 metres), although it can be sub-
5-10
stantially more than this in ideal conditions.
If a remote control is lost, the new one will have
to be programmed from one of the remaining
remote controls to match the car’s unique secu-
rity code. Get in touch with an authorized Saab
dealer.Yourdealerwillneedyoursecondremote
to program a new one
Alarm signals may differ between model variants for different coun-
tries.
Some of the car-alarm functions can be reprogrammed – con-
sult your Saab dealer for further details (see page 231).
If another remote or key is desired (up to total of
4),
all keys and remotes must be present when
programming additional ones.
| Categories | Saab 9-3 Manuals, Saab Manuals |
|---|---|
| Tags | Saab 9-3 M2000 |
| Model Year | 2000 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)