126
Interior equipment, trunk
4
Lower the entire backrest cushion by pulling this same handle
(item 3) forward. At the same time, pivot the beam backwards.
IMPORTANT: Whenyou replacethe belt beam using the handle
(item 3), you must verify that it is properly locked and that the two
red "warning tabs" go down (thereby indicating that locking has
taken place properly).
Lowering the right-hand part of the rear seat
WARNING
• If the head restraints have been removed, they must be stored
safely sothat theycannot be thrownaboutand injure someone
while braking or in a collision.
5
To increase the volume, the rear head restraints can be removed
before the backrest cushion is lowered.
•
Do not ride in the rear seat without having remounted the head
restraints, and making sure they are properly locked in place.
WARNING
•
Whenever you handle any system containing moving parts,
such as the belt beam, always be careful not to get pinched.
Never leave a child or animal unattended in the car. During sunny
weather the temperature in the cabin/luggage compartment can
climbto160-180°F(70-80°C).Smallchildrenareverysusceptible
to heat stroke.
• Never keep objects on the rear window shelf since they can be
thrown forward and cause personal injury during heavy brak-
ing or in the event of a collision.
•
When the back seat has been put back in place, make certain
that the belt beam is locked firmly on both sides (the red warn-
ing tabs must go down). This is vital since the upper anchor-
ages for the safety belts are located in the belt beam.The
belts will not restrain a rear seat occupant if the belt beam is
not properly latched
| Categories | Saab 9-3 Manuals, Saab Manuals |
|---|---|
| Tags | Saab 9-3 M2000 |
| Model Year | 2000 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)