Security
37
Alarm signals
Panic-function
In the car alarm system is a function called
"Panic-function".
NOTE
When the car alarm is armed, it will be trig-
gered if any door, the trunk lid or hood, is
opened, or if a window is broken.
Thealarmwillalsobetriggeredifanattempt
is made to bypass or short-circuit the igni-
tion switch, or to disconnect the battery.
•
It is possible to inadvertently deacti-
vate the car alarm and at the same
timeunlockthe car, if thebutton on the
remote control is pressed by mistake
when the control is still within range of
the car.
To activate panic function:
•
Push and hold one of the buttons on the
remote control for 2 seconds, or if you are
sitting inside the car...
If the alarm is triggered, the following alarm
signals will be set off:
•
Push the LOCK-switch on the center con-
sole for 2 seconds (not Convertibles).
•
When locking the car by remote con-
trol in extremely cold weather, it is
advisable to check that the lock
system has operated properly. To do
so, check that the interior locking but-
tons are all down.
•
Flashing of hazard warning lights for five
minutes.
These actions will trigger the alarm (hazard
warning lights and siren).
To deactivate panic function:
•
Siren wailing for 30 seconds.
The alarm signals will stop if the alarm is
deactivated (car unlocked) during the alarm
period.
•
Push one of the buttons on the remote
control, push the LOCK-switch in the
center console, turn the key in one of the
doors or turn the ignition to ON.
If not, unlock and relock the car again.
Whenthe panic-functionis activated the car
will be locked/unlocked depending upon
which button was pushed.
When the ignition is ON the panic-function
cannot be activated.
| Categories | Saab 9-3 Manuals, Saab Manuals |
|---|---|
| Tags | Saab 9-3 M2000 |
| Model Year | 2000 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)