CONSUMER INFORMATION
I070A01A-AAT
I090A01S-GAT
tread. Always replace your tires with those of
the recommended size. If you change wheels,
the new wheel's rim width and offset must meet
Hyundai specification.
TIRE BALANCING
WHEN TO REPLACE TIRES
A tire that is out of balance may affect handling
and tire wear. The tires on your Hyundai were
balanced before the car was delivered but may
need balancing again during the years you own
the car.
Whenever a tire is dismounted for repair, it
should be rebalanced before being reinstalled
on the car.
1.6
mm (0.06 in.)
I100A01FC-GAT
SPARE TIRE AND TOOLS
Wear indicator
I080A01A-AAT
TIRE TRACTION
HGK248
Tire traction can be reduced if you drive on
worn tires, tires that are improperly inflated or
on slippery road surfaces. Tires should be re-
placed when tread wear indicators appear. To
reduce the possibility of losing control, slow
down whenever there is rain, snow or ice on the
road.
WARNING:
o
Driving on worn-out tires is dangerous!
Worn-out tires can cause loss of braking
effectiveness, steering control and trac-
tion. When replacing tires, never mix ra-
dial and bias-ply tires on the same car. If
you replace radial tires with bias-ply tires,
they must be installed in sets of four.
Using tires and wheels of other than the
recommended sizes may cause unusual
handling characteristics that may cause
death, serious injury or property dam-
age.
D060J01X
Your Hyundai is delivered with the following:
Spare tire and wheel
Wheel nut wrench, Wrench bar, Spanner,
o
Screwdriver
Jack
The original tires on your car have tread wear
indicators. The tread wear indicators appear
when the tread depth is 1.6 mm (0.06 in.). The
tire should be replaced when these appear as a
solid bar across two or more grooves of the
8-3
| Categories | Hyundai Manuals, Hyundai Atos Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Atos |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)