2002 Hyundai Atos Owners Manual

VEHICLE MAINTENANCE REQUIREMENTS
F060A01A-AAT
EXPLANATIONOFSCHEDULEDMAIN-
TENANCE ITEMS
F060D01A-GAT
o  Fuel  lines, fuel hoses  and connec-
tions
Check the  fuel lines, fuel  hoses and connec-
tions  for leakage  and damage.  Replace  any
damaged or leaking parts immediately.
Inspect  the  hose routing  to  assure  that  the
hoses do  not come  in contact  with any  heat
source,  sharp  edges  or  moving  component
which might cause heat damage or mechanical
wear.  Inspect all  hose connections,  such  as
clamps and couplings,  to make sure they  are
secure, and that no leaks are present.  Hoses
should be replaced immediately if there is any
evidence of deterioration or damage.
F060M01A-AAT
o  Engine oil  and filter
The engine oil and filter should be changed at
the intervals specified in the maintenance sched-
ule. If the car  is being driven in severe  condi-
tions, more frequent oil and  filter changes are
required.
F060E01A-AAT
o  Timing  belt
Inspect all  parts related  to the timing  belt for
damage and  deformation. Replace any  dam-
aged parts immediately.
F060H01A-AAT
o  Air  cleaner filter
A Genuine Hyundai air cleaner filter is recom-
mended when filter is replaced.
F060B01A-AAT
o  Drive  belts
Inspect  all  drive  belts for  evidence  of  cuts,
cracks,  excessive wear  or  oil and  replace  if
necessary. Drive belts should be checked pe-
riodically for  proper  tension and  adjusted as
necessary.
F060G01A-AAT
o  Vapor hose  and fuel filler cap
The vapor  hose and  fuel filler cap  should be
inspected  at those  intervals  specified  in the
maintenance schedule. Make sure that a  new
vapor  hose or  fuel  filler  cap  is correctly  re-
placed.
F060J01A-AAT
o  Spark plugs
Make  sure to  install new  spark  plugs of  the
correct heat range.
F060C01A-GAT
o  Fuel  filter
F060N01X-GAT
o  Valve  clearances
A clogged filter can limit the speed at which the
vehicle may  be driven, damage  the emission
system and  cause hard starting.  If an exces-
sive amount of  foreign matter accumulates in
the fuel tank, the filter may require replacement
more frequently.
After installing a  new filter, run the  engine for
several  minutes, and  check  for leaks  at  the
connections.
F060F01A-AAT
o Vacuum, crankcase ventilation hos-
es
Incorrect valve clearance will not only result in
unsteady engine operation, but will also cause
excessive  noise and  reduced  engine perfor-
mance. Inspect valve clearance and adjust as
required while the engine is hot.
Inspect the  surface of  hoses for  evidence of
heat and/or mechanical damage. Hard and brit-
tle rubber, cracking, tears, cuts, abrasions, and
excessive swelling indicate deterioration. Par-
ticular  attention  should  be  paid  to  examine
those hose surfaces nearest to high heat sourc-
es, such as the exhaust manifold.
Valve-to-rocker arm clearance
Intake valves ..... 0.2 mm (0.008 in.)
Exhaust valves .... 0.25 mm (0.010 in.)
5-5
Product Specification
Categories Hyundai Manuals, Hyundai Atos Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 249 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, Atos
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field