FEATURES OF YOUR HYUNDAI
used because they may damage and weaken
the fabric.
pull on the height adjuster knob and then lower
or raise the height adjuster into an appropriate.
To raise the height adjuster, pull it up. To lower
it, push it down while pressing the height ad-
juster button. Release the knob to lock the
anchor into position. Try to slide the anchor
upward and downward after releasing the knob
to make sure that it has locked into position.
There will be an audible "click" when the tab
locks into the buckle.
The seat belt automatically adjusts to the proper
length only after the lap belt is adjusted manu-
ally so that it fits snugly around your hips. If you
lean forward in a slow, easy motion, the belt will
extend and let you move around. If there is a
sudden stop or impact, however, the belt will
lock into position. It will also lock if you try to
lean forward too quickly.
ZB090K1-A
When to Replace Seat Belts
The entire seat belt assembly or assemblies
should be replaced if the vehicle has been
involved in an accident. This should be done
even if no damage is visible. Additional ques-
tions concerning seat belt operation should be
directed to your Hyundai Dealer.
WARNING:
o
The height adjuster must be in the locked
position whenever the vehicle is moving.
The misadjustment of height of the shoul-
der belt could reduce the effectiveness
of the seat belt in a crash.
ZB090U1-A
o
Adjusting Your Seat Belt
B170A03X-GAT
HEIGHT ADJUSTABLE FRONT SEAT
SHOULDER BELT (Not all models)
ZB090T1-H
SEAT BELTS (3-Point Type)
To Fasten Your Belt
FUA1090Q
You should place the belt as low as possible on
your hips, not on your waist. If located too high
on your body, the chances of sliding out from
under it and suffering serious injury or death are
increased. Both arms should not be under or
over the belt. Rather, one should be over and
the other under, as shown in the illustration.
XV10191E
You can adjust the height of the front seat
shoulder belt anchor to one of 4 positions. The
shoulder belt should be adjusted so that it fits
midway over the shoulder, and NEVER across
the neck.
FUA1090P
To fasten your seat belt, pull it out of the
retractor and insert the metal tab into the buckle.
To adjust the height of the shoulder belt anchor,
1-8
| Categories | Hyundai Manuals, Hyundai Atos Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Atos |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)