CORROSION PREVENTION & APPEARANCE CARE
Household detergents, solvents and abrasive
cleaning materials should not be used in order
ot avoid damaging the paint film.
Plastic wheel covers should be cleaned using a
sponge and water. Cast alloy wheels should be
cleaned using a mild soap or neutral detergent.
Abrasive compounds must not be used since in
the event of these damaging the lacquer coat-
ing, oxidisation of the aluminium wheel will
occur, spoiling the appearance.
JE080A1-E
JE100A1-E
BUMPER MAINTENANCE
SEAT BELTS
The special material from which the bumpers
are manufactured warrants special attention to
preserve the appearance of thebumpers. Avoid
contact with battery electrolyte or brake fluid
and ensure that accidental spillages are imme-
diately flushed with water.
Seat belts should be cleaned only with a mild
soap solution. Strong detergents, solvens or
bleaches may damage the belt webbing and
therefore reduce the effectiveness of the belt.
Belts which display signs of fraying, wear of cut
should be replaced.
Do not use abrasive cleaning materials which
may damage the bumpers.
JE110A1-E
The use of an a toothbrush will facilitate clean-
ing between the wheel "spokes".
Avoid subjecting the bumpers to high tempera-
tures such as may be encountered in high bake
paing ovens.
INTERIOR VALETING
The soft trim and carpets should be maintained
with the regular use of a vacuum cleaner. Heavy
soiling should be removed with a dry cleaning
agent recommended for this purpose following
the instructions of the product manufacturer.
Paint thinner, solvents or other such cleaning
materials should not be used since damage to
the upholstery may result.
JE060A1-E
STAIN/SPOT REMOVAL
JE090A1-E
ACCIDENT REPAIRS
Should tree sap, dead insects or tar prove to be
difficult to remove from the paint film, turpentine
or a proprietary paint cutting compound may be
used. Ensure that the area to be cleaned is not
rubbed intensively to prevent breaking through
the colour coat and exposing the under coat.
In the event of the body work sustaining dam-
age, the following points should be noted prior
to repairs being undertaken.
If body panels are replaced or repaired, anti
corrosion treatment must be applied to the
repair area. The product used must be compat-
ible with those used in manufacture. It is recom-
mended that repairs are entrusted to a Hyundai
dealer to ensure that replacement parts used
are of the same high quality as those used in
manufacture of the vehicle and that the correct
repair methods and materials will ensure ade-
quate levels of corrosion protection and the
continued validity of the Anti Perforation War-
ranty.
JE120A1-E
WINDOWS
A proprietary glass cleaner should be used to
clean the inside of the windows. However, the
rear heated windscreen must only be cleaned
using a light horizontal cleaning action. Care
should be exercised to avoid the use of abra-
sive cleaners or contact with items of jewellery
which may damage the heating elements.
JE070A1-E
POLISHING
The exterior paint work should be polished with
a proprietary wax polish when water no longer
collects in bead form on the paint work. The
instructions of the product manufacturer should
be adhered to.
4-2
| Categories | Hyundai Manuals, Hyundai Atos Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Atos |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)