FEATURES OF YOUR HYUNDAI
B922B02X-GAT
1.
3. BASS/TREBLE Control Knob
6. PRESET STATION SELECT Button
Six (6) stations for AM, FM and FM2 respec-
tively can be preset in the electronic memory
circuit on this unit.
POWER ON-OFF/VOLUME CON-
TROL KNOB
BASS Control Knob
Press to pop the knob out and turn to the left or
right for the desired bass tone.
The radio unit may be operated when the igni-
tion key is in the "ACC" or "ON" position. The
clock will be displayed automatically, although
the radio unit has gone out. Press the button to
switch the power on. The LCD shows the radio
frequency in the radio mode or the CD track
indicator in the CD mode. To switch the power
off, press the button again.
HOW TO PRESET STATIONS
TREBLE Control Knob
Six AM and twelve FM stations may be pro-
grammed into the memory of the radio. Then,
by simply pressing the band select button and/
or one of the six station select buttons, you may
recall any of these stations instantly. To pro-
gram the stations, follow these steps:
Further pull-lock position of popped-up knob.
Turn to the left or right for the desired treble
tone.
4.
BAND Selector
Pressing the
VOLUME Control
button changes the AM,
FM/AM
Rotate the knob clockwise to increase the vol-
ume and turn the knob counterclockwise to
reduce the volume.
FM1 and FM2 bands. The mode selected is
displayed on LCD.
o
o
o
o
Press band selector to set the band for AM,
FM, and FM2.
Select the desired station to be stored by
seek, scan or manual tuning.
5
. TUNE (Manual) Select Button
BALANCE Control
Press the (+) side or (-) side to increase or to
decrease the frequency. With the button held
down for 0.5 sec. or more, the stop signal
(broadcasting radio wave) is ignored and chan-
nel selection continues.
Determine the preset station select button
you wish to use to access that station.
Press the station select button for more than
two seconds. A select button indicator will
show in the display indicating which select
button you have depressed. The frequency
display will flash after it has been stored into
the memory. You should then release the
button, and proceed to program the next
desired station. A total of 18 stations can be
programmed by selecting one AM and one
FM station per button.
Pull and turn the control knob clockwise to
emphasize right speaker sound. (Left speaker
sound will be attenuated) When the control
knob is turned counterclockwise, left speaker
sound will be emphasized. (Right speaker sound
will be attenuated)
SEEK Operation (Automatic Channel
Selection)
2.
FAD (Fader Control) Knob
Press the TUNE select button 1 sec. or more,
and releasing will automatically tune the next
available station. When the (+) side is pressed
longer than 1 second and releasing will auto-
matically tune the next higher frequency and
when the (-) side is pressed longer than 1
second and releasing will automatically tune
the next lower frequency.
Turn the control knob counterclockwise to em-
phasize front speaker sound. (Rear speaker
sound will be attenuated) When the control
knob is turned clockwise, rear speaker sound
will be emphasized. (Front speaker sound will
be attenuated)
o
When completed, any preset station may be
recalled by selecting AM, FM or FM2 band
and the appropriate station button.
1-46
| Categories | Hyundai Manuals, Hyundai Atos Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Atos |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)