DRIVING YOUR HYUNDAI
SC110E1-E
CAUTION:
o
Check the automatic transaxle fluid level
regularly, and add fluid as necessary.
o D (Drive):
Do not move the selector to the L position
when the vehicle speed is in excess of 60
m.p.h.
With the selector in this position, first gear will
be engaged from rest and the transaxle will
automatically upshift to second, third and fourth
depending upon the vehicle speed, throttle po-
sition and the position of the Overdrive switch.
The engine may not be started with the selector
in this position.
SC130A1-E
OVERDRIVE SWITCH
C090H01E-EAT
NOTE:
o
The brake pedal should be depressed
when shifting from NEUTRAL to a for-
ward or reverse gear.
o
The brake pedal fully depressed in order
to move the shift lever from the "P"
(Park) position to any of the other posi-
tions.
It is always possible to shift from "R",
"N", "D", "2", "L" position.
SC110F1-E
o 2 (Second Gear):
With the selector in this position, first gear will
be engaged from rest. The transaxle will upshift
to second gear depending upon the vehicle
speed and throttle position. No upshift to third or
fourth will occur. The engine may not be started
with the selector in this position.
o
C090P01X-DAG
C090I01E-EAT
CAUTION:
o
The overdrive switch prevents the transaxle
upshifting higher than third gear when the switch
is turned "OFF". The transaxle will start from
rest in first gear and upshift to second and third
gear depending upon the roadspeed and throttle
opening but will not upshift to fourth gear. When
the overdrive switch is turned "ON", the transaxle
will start from rest in first gear and will upshift,
depending upon roadspeed and throttle open-
ing to second, third and fourth gear. Therefore,
when the overdrive switch is turned "OFF", the
transaxle performs as a three speed unit and
the overdrive warning light located in the instru-
ment cluster will be illuminated. When the over-
drive switch is turned "ON", the transaxle func-
tions as a fully automatic four speed unit with
CAUTION:
Shift into "R" and "P" only when the
vehicle has completely stopped.
Do not accelerate the engine in the re-
verse or any of the forward positions
with the brakes applied.
Do not move the selector to the 2 position
when the vehicle speed is in excess of 50
m.p.h.
o
o
o
Always apply the footbrake when shift-
ing from "P" or "N", to "R", "D", "2" or
"L".
Do not use the "P" (Park) position in
place of the parking brake. Always set
the park-ing brake, shift the transaxle
into "P" (Park) and turn off the ignition
when you leave the vehicle, even mo-
mentarily. Never leave the vehicle unat-
tended whilst the engine is running.
SC110G1-E
o L (Low Gear):
With the selector in this position, first gear will
be engaged from rest. No upshift will occur
regardless of vehicle speed and throttle open-
ing. The engine may not be started with the
selector in this position.
2-
6
| Categories | Hyundai Manuals, Hyundai Atos Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Atos |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)