CORROSION PREVENTION & APPEARANCE CARE
moved. Should any damage to or deterioration
of the underbody coating be apparent, the ad-
vice of a Hyundai dealer regarding the use of a
compatible repair material should be sought.
since the carpet may begin to create musty
smells and promote internal corrosion of the
floorpan.
ZE000A1-E
4.
CORROSION PRE-
VENTION & AP-
PEARANCE CARE
JE050A1-E
NOTE:
VALETING
The underbody should never be steam
cleaned since the underbody coating may
be removed by this process.
Regular cleaning of the exterior paintwork serves
two important functios. Firstly, the removal of
abrasive dirt and contaminants will maintain the
lustre of the paintwork and will prevent
discolouration and dulling due to prolonged con-
tact.
Secondly, the presence of damage through
impact or abrasion will be apparent allowing
early rectification to be made thus preventing
corrosion from becoming established and
spreading beneath the paint film. To avoid "wa-
ter spotting" the vehicle should not be washed
in direct sunlight particularly in the case of
vehicles having dark body colours. The heat
from the sun rays is absorbed by the paint film
increasing the surface temperature. This action
causes water used for washing to evaporate
quickly leaving behind the deposits from the
water and the shampoo used.
Use only a shampoo intended for the purpose
and ensure that the body work is thoroughly
wetted to soften the dirt film prior to attempting
to remove this.
After removing the dirt film with a soft sponge,
the body work should be thoroughly rinsed and
then dried with a good quality ch mois leather to
prevent streaking or spotting of the paint work.
ZE020A1-E
APPEARANCE CARE
During the interim period between power wash-
ing the underbody, the more vulnerable areas
such as wheelarches should be hosed off,
particularly during the winter season to prevent
prolonged contact of road salt with the body.
Ensure that the various drain points located at
bottom of the door panels are kept clear, to
prevent water becoming trapped within the cavi-
ties. Wherever possible, the parking of the
vehicle in a confined, poorly ventilated location
(e.g.) garage should be avoided when the vehi-
cle is wet or covered with snow or ice. Under
these conditions, the internal cavities of the
vehicle will remain damp for long periods of
time which encourage corrosion. Parking the
vehicle where good ventilation exists is prefer-
able.
In using the most advanced design and con-
struction practices, every Hyundai is built to
retain its original factory finish for many years.
However, long term durability is also greatly
dependant upon maintaining the various pro-
tection systems and coatings used in manufac-
ture since constant exposure to the elements
will eventually result in their breakdown and
loss of effectiveness. The following sugges-
tions are made to assist in the maintenance of
the vehicle bodywork.
4
ZE020B1-E
Underbody Coatings
Every Hyundai passenger car receives a full
underbody and cavity injection treatment during
production. In order that this treatment may
retain maximum effectiveness, it is recommend-
ed that the underbody receives a power wash
and a thorough inspection after each winter
season. In so doing any accumulations of mud,
which act as moisture traps and combine with
road salts to accelerate corrosion, will be re-
ZE020C1-E
Interior
During the winter period, it is possible that the
carpet within the passenger compartment may
become wet. The carpet should not be allowed
to remain in this condition for prolonged periods
4-1
| Categories | Hyundai Manuals, Hyundai Atos Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Atos |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)