2002 Hyundai Atos Owners Manual

DRIVING YOUR HYUNDAI
C090C01A-AAT
C090G01S-GAT
o
o
o
Do not accelerate the  engine in reverse
or any of the forward positions with  the
brakes applied.
Always apply the  footbrake when shift-
ing from  "P" or "N", to  "R", "D", "2"  or
"L" position.
Do  not  use the  "P"  (Park)  position  in
place of   the parking brake. Always  set
the parking brake, shift the transaxle into
"P" (Park) position and turn off the igni-
tion  when you  leave  the vehicle,  even
momentarily.  Never  leave   the  vehicle
unattended while the engine is running.
Check the automatic transaxle fluid level
regularly, and add fluid as necessary.
o R(Reverse):
o  L (Low gear):
Use for backing up the vehicle. Bring the car to
a  complete stop  before  shifting  the selector
lever to "R" position.
Use for  driving up  a very  steep  grade or  for
engine braking  when descending  steep hills.
When  downshifting to  "L",  the  transaxle will
temporarily  remain  in second  gear  until  the
vehicle  has  slowed enough  for  low  gear  to
engage. Do not exceed 50 km/h (30 mph) in low
gear.
"L" shifts to 1st gear only. However, shift up to
2nd  is  performed  when  the  car  exceeds  a
certain  speed and,  as  speed  increases, the
transaxle will  shift  up to  3rd gear  to prevent
over-revving the engine.
C090D02A-AAT
o  N (Neutral):
In the  "N" position, the transaxle  is in neutral
position, which  means that  no gears  are en-
gaged. The engine can be started with the shift
lever in "N" position, although this is not recom-
mended except if the engine stalls while the car
is moving.
o
C090E01A-GAT
C090H01E-GAT
o  D (Drive):
NOTE:
C090P01A-GAT
Use for normal driving. The transaxle will auto-
matically shift  through a  four-gear sequence,
giving best economy and power. Never down-
shift  manually to  "2"  position or  "L"  position
when vehicle speed is more than 95  km/h (60
mph).
o
o
o
For smooth and safe operation, depress
the brake pedal when shifting from "Neu-
tral" position or "Park" position to a for-
ward or reverse gear.
The brake pedal fully depressed in order
to  move  the  shift  lever  from  the   "P"
(Park) position to any of the  other posi-
tions.
It is  always possible  to shift  from "R",
"N", "D",  "2", "L"  position to  "P" posi-
tion. The vehicle must be fully stopped to
avoid transaxle damage.
Overdrive Switch
C090F01A-AAT
o  2 (Second gear):
Use for driving on a slippery road, hill climbing
or engine  braking  downhill. "2"  automatically
shifts between first and second gears.
This  means  that  no  shift-up  to  3rd  gear  is
performed. However, the shift-up to third gear is
done when  the car  speed exceeds  a certain
value to prevent the engine from over-revving.
Manually move the selector to "D" returning to
normaldrivingcondition.
C090P01X
C090I01E-AAT
CAUTION:
o
When the  overdrive  switch is  turned on,  the
transaxle will automatically upshift  to the sec-
ond, third and overdrive gears. When the over-
Shift into "R" and "P" position only when
the vehicle has completely stopped.
2-
6
Product Specification
Categories Hyundai Manuals, Hyundai Atos Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 249 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, Atos
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field