WHAT TO DO IN AN EMERGENCY
SD070I1-E
firmly on the ground, remove the jack and
tighten the wheel nuts securely. At the first
available opportunity, the wheel nut torque
should be checked with a suitable torque
wrench.
If the valve cap is lost from any of the valves,
a replacement should be obtained and fitted at
the first available opportunity. The valve cap
prevents the ingress of dirt which may cause
the valve to stick and therefore leak and is part
of the valve sealing function.
7.
Re-install Wheel Nuts
Wheel nut tightening torque
Steel wheel & aluminium alloy wheel:
65-80 lb.ft (900-1,100 kg.cm)
Ensure that the spare wheel, jack and jack
handle as well tools are correctly located in the
boot of the vehicle to prevent damage and
noise.
SD070K1-E
AFTER CHANGING WHEELS
SD080A1-E
D060H01A
VEHICLE TOWING OR RECOVERY
Fit the wheel nuts onto the studs and tighten
with the wheel brace.
XD070J1-E
8.
Lower Vehicle and Tighten Nuts
D060J01X
o
OK FOR AUTOMATIC OR MANUAL
TRANSAXLE EQUIPPED VEHICLE
D080A01A
The pressure of the spare tyre should be
checked at the first available opportunity. If any
doubt exists as to the tyre pressure, the vehicle
should be driven slowly to the nearest service
station and the tyre pressure checked and
adjusted as required.
CAUTION:
An incorrect tow or recovery could result in
serious damage to the vehicle. If any dam-
age to the suspension, steering or transaxle
is apparent or suspected, a towing ambu-
lance must be used.
D060I01A
Lower the car to the ground turning the jack
handle counterclockwise. When the vehicle is
3-6
| Categories | Hyundai Manuals, Hyundai Atos Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Atos |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)