WHAT TO DO IN AN EMERGENCY
3
11
D060I01E-GAT
8.
Wheel nut tightening torque:
Steel wheel & aluminium alloy wheel:
900-1,100 kg.cm (65-80 lb.ft)
air may leak from the tire. If you lose a
valve cap, buy another and install it as
soon as possible.
Lower Vehicle and Tighten
Nuts
After you have changed wheels, al-
wayssecuretheflattireinitsplaceand
return the jack and tools to their proper
storage locations.
D060J01O-AAT
AFTER CHANGING WHEELS
HJM4016
Lower the car to the ground by turning
the wheel nut wrench counterclock-
wise. Then position the wrench as
shown in the drawing and tighten the
wheel nuts. Be sure the socket is
seatedcompletelyoverthenut.Donot
stand on the wrench handle or use an
extensionpipeoverthewrenchhandle.
Go around the wheel tightening every
other nut until they are all tight. Then
double-check each nut for tightness.
After changing wheels, have a techni-
cian tighten the wheel nuts to their
proper torque as soon as possible.
D060J01JM
If you have a tire gauge, remove the
valve cap and check the air pressure.
If the pressure is lower than recom-
mended, drive slowly to the nearest
service station and inflate to the cor-
rect pressure. If it is too high, adjust it
until it is correct. Always reinstall the
valve cap after checking or adjusting
tirepressure.Ifthecapisnotreplaced,
Jmgene-3.p65
11
4/12/04, 5:02 PM
| Categories | Hyundai Manuals, Hyundai Tucson Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Tucson |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)