2 DRIVING YOUR HYUNDAI
20
o Whilst towing, check the follow-
ing items.
(9) For speedometer test or inspec-
tion/maintenance (I/M) program of
Tucsan 4WD, use a four wheel
chassis dynamometer.
!
1
. The ignition switch is in "ACC"
or "ON".
. Place the shift lever in neutral
WARNING:
Keep away from the front of the
vehicle while inspecting. This is
very dangerous as the vehicle can
jump forward and cause serious
injury or death.
2
(
For Automatic Transaxle, "N"
position).
!
CAUTION:
Never engage the parking brake
while performing these tests.
3
. Release the parking brake.
NOTE:
(10)When using tyre chains, always
attach them to the front wheels.
To avoid serious damage to your
4WD vehicle, limit towing to 10 mph
and not for more than 1 mile at ANY
TIME.
o In rare cases when it's unavoid-
able that a 4WD vehicle is to be
inspected for speedometer test
on 2WD roll tester, strictly follow
the procedures next.
(11)If
thefrontorrearwheelsgetstuck
in the mud, do not spin them reck-
lessly. The 4WD system could be
damaged.
1.
2.
Check the tyre pressures rec-
ommended for your vehicle.
Place the front wheels on the
rolltesterforspeedometertest
as shown in the illustration.
Release the parking brake.
3.
Temporary free roller
4. Place the rear wheels on the
temporaryfreerollerasshown
in the illustration.
Roll tester(Speedometer)
HJM1029
jmuk-2.p65
20
5/31/04, 4:42 PM
| Categories | Hyundai Manuals, Hyundai Tucson Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Tucson |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)