6 OWNERMAINTENANCE
26
CHECKING BRAKE PEDAL
CLEARANCE
CHECKING ENGINE DRIVE
BELTS
G170A01A-GAT
BRAKE PEDAL
G180A01A-GAT
YG200A1-E
1.
With the engine turned off, check
the belts for cracks, fraying, or
excessive wear. Replace the belt if
it is in poor condition.
2.
With your thumb (with a force
approx. 10 kg) press on each belt
midway between the pulleys. Each
belt should deflect no more than
the amount shown in figure.
45.1
(1.78
mm
in.)
0.12 ~ 0.31 in.
(3 ~ 8 mm)
G180A01L
G160A01HR
You need a helper to check the brake
pedal clearance. With the engine run-
ning, have your helper press down on
the brake pedal several times and
then hold it down with a force of about
490 N (50 Kg, 110 lbs). The brake
pedal clearance is the distance from
the top surface of the brake pedal to
the asphalt sheeting under the floor
mat.
If the brake pedal clearance is not
within the limits specified in the illus-
tration, have it inspected by your
Hyundai authorised repairer and ad-
justed or repaired if necessary.
With the engine off, press down on
the brake pedal several times to re-
duce the vacuum in the brake booster.
Then, using your hand, press down
slowly on the brake pedal until you
feel a change in resistance. This is
the brake pedal freeplay. The freeplay
should be within the limits specified in
the illustration. If it is not, have it
inspected by your Hyundai authorised
repairer and adjusted or repaired if
necessary.
jmuk-6.p65
26
5/31/04, 4:48 PM
| Categories | Hyundai Manuals, Hyundai Tucson Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Tucson |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)