6
DO-IT-YOURSELF MAINTENANCE
30
The fuse box for the lights and other
electrical accessories will be found on
the left side of crash pad. Inside the
box you will find a list showing the
circuits protected by each fuse.
If any of your car's lights or other
electrical accessories stop working, a
blown(open) fuse could be the rea-
son. If the fuse has burned out, you
will see that the metal strip inside the
fuse has melted through. If you sus-
pect a blown fuse, follow this proce-
dure:
Good
Burned out
G200B01JM
G200B02L
4. Replace the blown fuse by press-
ing a new fuse of the same rating
into place. The fuse should be a
snug fit. If it is not, have the fuse
clip repaired or replaced by a
Hyundai dealer. If you do not have
a spare fuse, you may be able to
borrow a fuse of the same or lower
rating from an accessory you can
temporarily get along without (the
radio or cigarette lighter, for ex-
ample). Always remember to re-
place the borrowed fuse.
!
CAUTION:
1.
2.
Turn off the ignition and all other
switches.
A burned-out fuse indicates that
there is a problem in the electrical
circuit. If you replace a fuse and it
blows as soon as the accessory is
turned on, the problem is serious
and should be referred to a
Hyundai dealer for diagnosis and
repair. Never replace a fuse with
anything except a fuse with the
same or a lower amperage rating.
A higher capacity fuse could cause
damage and create a fire hazard.
Open the fuse box and examine
each fuse. Remove each fuse by
pulling it toward you (a small "fuse
puller" tool is contained in the fuse
box to simplify this operation).
Be sure to check all other fuses
even if you find one that appears to
have burned out.
3.
NOTE:
See page 6-44 for the fuse panel
descriptions.
Jmgene-6.p65
30
4/13/04, 1:46 PM
Product Specification
Categories | Hyundai Manuals, Hyundai Tucson Manuals |
---|---|
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Tucson |
Document File Type | |
Copyright | Attribution Non-commercial |