FEATURES OF YOUR HYUNDAI
1
13
B070F01A-GAT
KEYLESS ENTRY SYSTEM
(If installed)
Locking doors
B070E02HP-GAT
Replacing the battery
!
CAUTION:
When the transmitter's battery begins
togetweak,itmaytakeseveralpushes
on the button to lock or unlock the
doors, and the LED will not light. Re-
place the battery as soon as possible.
Only the transmitter can disarm the
armedstage. Ifthetransmitterdoes
not disarm the system, it is neces-
sary to take the following steps;
1.
2.
Close all doors.
Pushthe'LOCK'buttononthetrans-
mitter.
3.
At the same time all doors lock, the
turn signal lights will blink once to
indicate that the system is armed.
1.
2.
3.
Unlock the door with the key,
which will cause, the alarm to be
activated.
Insert the key in the ignition key
cylinder and turn the ignition key
to "ON" position.
Battery type : CR2032
Replacement instructions:
Unlocking doors
1.
2.
Push the 'UNLOCK' button on the
transmitter.
At the same time all doors unlock,
the turn signal lights will blink twice
to indicate that the system is dis-
armed.
Wait for 30 seconds.
After completing the steps above,
the system will be disarmed.
Screwdriver
HJM2004
1.
Carefully separate the case with a
blade screwdriver as shown in the
illustration.
Jmgene-1a.p65
13
4/12/04, 4:47 PM
| Categories | Hyundai Manuals, Hyundai Tucson Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Tucson |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)