3 IN CASE OF EMERGENCY
4
IF THE ENGINE OVERHEATS
1
. Ensure that the booster battery is
2 volt type. If the booster battery is
installed in another vehicle, ensure
that the two vehicles are not touch-
ing.
. Turn off all unnecessary electrical
WHAT TO DO IN AN EMERGENCY
equipment in both vehicles.
. Ensure that the engine of the ve-
hicle providing the jump start is run-
ning prior to connection of the jump
cables.
. Connect the red jump cable to the
positive (+) terminal of the booster
battery and the other end to the
positive (+) terminal of the dis-
charged battery.
. Attach the black jump cable to the
negative (-) terminal of the booster
battery,andtheotherendtoaground
point within the engine compart-
ment of the vehicle with the flat
battery. Do not connect to the nega-
tive battery terminal of the flat bat-
tery since sparks may be generated
with the subsequent risk of explo-
sion.
6. Raise the booster vehicle engine
speed to 2,000 r.p.m. and start the
engine of the vehicle with the flat
battery.
7. Switch "ON" the main beam
headlamps before carefully remov-
ing the jumper cables in the reverse
order of attachment. Once the
jumper cables have been removed,
switch "OFF" the main beam
headlamps.
SD040A2-E
1
If the temperature gauge indicates
overheating:
1. Pullofftheroadandstopassoonas
it is safe to do so.
2
3
2. Place the gear selector lever in "P"
(automatic), or neutral (manual
transaxle)andsettheparkingbrake.
Iftheairconditioningison,turnitoff.
3. If coolant is running out under the
car or steam is coming out from
under the bonnet stop the engine.
Do not open the bonnet until the
coolant has stopped running or the
steaming has stopped. If there is no
visiblelossofcoolantandnosteam,
leave the engine running and check
to be sure the engine cooling fan is
operating.
4
5
!
CAUTION:
If the jump cables is incorrectly
installed, damage to the vehicle
electrical system may occur, in par-
ticular the electronic components
such as the Fuel Injection system
computer and the Automatic
transaxle computer. The battery
must never be disconnected whilst
the engine is running.
If the fan is not running, turn the
engine off.
4. Checktoseeifthewaterpumpdrive
belt is broken. If it is not broken,
check to see that it is tight. If the
drive belt seems to be satisfactory,
check for coolant leaking from the
radiator, hoses or under the car. (If
theairconditioninghadbeeninuse,
jmuk-3.p65
4
5/31/04, 4:42 PM
| Categories | Hyundai Manuals, Hyundai Tucson Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Tucson |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)