DO-IT-YOURSELFMAINTENANCE
6
REMOVALOF WATERFROM
THE FUEL FILTER
33
The power steering fluid level should
be checked regularly.
G240A01A-AAT
POWER STEERING HOSES
G300A02O-GAT
DIESEL ENGINE
To check the power steering fluid
level, be sure the ignition is "OFF",
then check to make certain that the
power steering fluid level is between
the "MAX" and "MIN" level markings
on the fluid reservoir.
It is suggested that you check the
power steering hose connections for
fluid leakage at regular intervals. The
power steering hoses should be re-
placed if there is severe surface crack-
ing, pulling, scuffing or worn spots.
Deterioration of the hose could cause
premature failure.
NOTE:
Grinding noise from the power
steering pump may be heard im-
mediately after the engine is started
in extremely cold conditions (be-
low -20°C). In this case, if the noise
stops during warm up, there is no
abnormal function in the system.
This is due to a power steering
fluid characteristic in extremely
cold conditions.
HJM5010
If the fuel filter warning lamp illumi-
nates during driving, it indicates that
water has accumulated in the fuel
filter. If this occurs, remove the water
as described below.
1.
Unscrew the mounting bolt on the
fuel filter and raise the fuel filter up.
Recommended Fluid
Use PSF-3 type fluid.
NOTE:
Do not start the engine when the
power steering oil reservoir is
empty.
Jmgene-6.p65
33
4/13/04, 1:46 PM
| Categories | Hyundai Manuals, Hyundai Tucson Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Tucson |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)