CONTROLS AND EQUIPMENT1
POWER WINDOWS
11
B070E02HP-GAT
Replacing the battery
B060A03L-AAT
Battery
When the transmitter's battery begins
togetweak,itmaytakeseveralpushes
on the button to lock or unlock the
doors, and the LED will not light. Re-
place the battery as soon as possible.
Battery type : CR2032
Case
B070E01JM
B060A03JM-D
2.
Remove the old battery from the
case and note the polarity. Make
sure the polarity of the new battery
isthesame(+sidefacingdown),then
insert it in the transmitter.
The power windows operate when the
ignition key is in the "ON" position. The
main switches are located on the
driver's armrest and control the front
and rear windows on both sides of the
vehicle. The windows may be opened
by depressing the appropriate window
switch and closed by pulling up the
switch. To open the window on the
driver's side, press the switch(1) half-
way down. The window moves as long
astheswitchisoperated.Tofullyopen
thedriver'swindowautomatically,press
the switch fully down. In automatic
operation, the window will fully open
even if you let go of the switch. To stop
at the desired opening, pull up and
release the switch.
Screwdriver
HJM2004
Replacement instructions:
1.
Carefully separate the case with a
blade screwdriver as shown in the
illustration.
jmuk-1a.p65
11
5/31/04, 4:35 PM
| Categories | Hyundai Manuals, Hyundai Tucson Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Tucson |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)