OWNERMAINTENANCE 6
CHANGING THE AIR
CLEANER FILTER
WINDSCREEN WIPER
BLADES
15
4
. Insert the sparking plug into the
cylinder head and using a suitable
plug socket, slowly rotate the spark-
ing plug, (being careful not to cross-
thread) until the plug contacts the
seating area. Tighten the plug with
the socket by a further 1/2 to 3/4 of
a turn only.
G070A01E-AAT
ZG080A2-E
HJM5038
HJM5032-D
To change the filter, unsnap the clips
around the cover. When this is done,
the cover can be lifted off, the old
filter removed and the new filter put in
its place. Genuine Hyundai Replace-
ment Parts are recommended.
The wiper blades should be carefully
inspected from time to time and
cleaned to remove accumulations of
road film or other debris.
To clean the wiper blades and arms,
use a clean sponge or cloth with a
mild soap or detergent and water.
If the wipers continue to streak or
smear the glass, replace them with
genuine Hyundai replacement parts
or their equivalent.
G060C03JM
!
5
. Replace the plug lead ensuring that
the cap is pushed firmly into place.
Confirm that the cap is correctly
seated by lightly pulling upon it.
CAUTION:
o Operating your vehicle without
a proper air filter in place can
result in excessive engine wear.
o When removing the air cleaner
filter, be careful that dust or dirt
does not enter the air intake.
These may result in damage to
the air cleaner filter.
jmuk-6.p65
15
5/31/04, 4:48 PM
| Categories | Hyundai Manuals, Hyundai Tucson Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Tucson |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)