Controls in detail
Panorama roof with power tilt/sliding panel*
Fully opening (Express-open) the
panorama roof with tilt/sliding panel
Synchronizing the panorama roof with
power tilt/sliding panel
̈ Switch off the ignition (୴ page 40) and
remove the SmartKey from the starter
switch.
̈
Pull the roof panel switch past the
resistance point in direction of
arrow 1 (୴ page 254) and release.
The tilt/sliding panel and its roller
sunblinds must be synchronized
Vehicles with KEYLESS-GO*:
̈
Switch off the ignition (୴ page 41).
ț
after the battery has been
disconnected or discharged
The tilt/sliding panel opens com-
pletely.
̈ Open the driver’s door (this puts
the starter switch in position 0,
same as with the SmartKey
removed from the starter switch).
The driver’s door then can be
closed again.
ț
ț
after a malfunction
Stopping the panorama roof with
tilt/sliding panel during Express-open
if the tilt/sliding panel does not open
smoothly
̈
Move the roof panel switch in any
direction.
!
Do not attempt to open or close the
tilt/sliding panel before the tilt/sliding panel is
properly synchronized. The tilt/sliding panel
could otherwise lock-up in the open position.
̈ Remove the fuse for the tilt/sliding
panel from the fuse box (୴ page 518).
The tilt/sliding panel will stop in its
current position.
i For information on which fuse box contains
the fuse for the power tilt/sliding panel, see the
fuse chart provided with the vehicle tool kit
If the tilt/sliding panel cannot be closed or
synchronized, contact an authorized
Mercedes-Benz Light Truck Center or call
Roadside Assistance (୴ page 325).
(୴ page 469).
୴୴
255
| Categories | Mercedes-Benz Manuals, Mercedes-Benz R-Class Manuals |
|---|---|
| Tags | Mercedes Benz R350, Mercedes Benz V251, Mercedes-Benz R320 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)