Controls in detail
Driving systems
Setting the following distance in
Distronic
Warning!
G
Warning!
G
You can set the specified following
Distronic switches off and releases the
brakes when the vehicle decelerates below
the minimum speed of 20 mph (30 km/h)
by operation of the system. At that time the
driver must apply the brakes in order to
reduce vehicle speed further or bring it to
a stop.
It is up to the driver to exercise discretion to
select the appropriate setting given road
conditions, traffic, driver’s preferred driving
style and applicable laws and driving recom-
mendations for safe following distance.
distance for Distronic by varying the time
setting between 1.0 and 2.0 seconds. Us-
ing this time setting and the current speed
of your vehicle, Distronic calculates and
sets the required following distance to the
preceding vehicle. The set distance will be
shown in the multifunction display
(
୴ page 267).
!
Setting the automatic transmission to N
while driving cancels the Distronic. However, the
automatic transmission should not be set to N
while driving except to coast when the vehicle is
in danger of skidding (e.g. on icy roads).
The distance setting switch for the time
setting is located on the cruise control
lever on the left-hand side of the steering
column.
i Depressing the accelerator pedal does not
deactivate the Distronic. After a brief accelera-
tion (e.g. for passing), the Distronic will resume
the last set speed.
1
2
3
Distance setting switch
To decrease distance
To increase distance
272
| Categories | Mercedes-Benz Manuals, Mercedes-Benz R-Class Manuals |
|---|---|
| Tags | Mercedes Benz R350, Mercedes Benz V251, Mercedes-Benz R320 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)