Practical hints
Battery
Step 8 (Disconnecting)
Step 9 (Removing)
̈ Carry out steps 7 through 1 in reverse
order to completely reinstall the bat-
tery, (୴ page 508) to (୴ page 505).
̈
Take out battery.
Step 10 (Reinstalling)
Step 11 (Reconnecting)
̈
Insert battery into the well under the
passenger seat.
̈
If the battery has been removed, carry
out step 10 (୴ page 509) before start-
ing the connecting procedure.
̈
̈
Open the driver’s door.
Make sure the SmartKey is removed
from the starter switch.
f Positive terminal with cover
g Negative terminal
Vehicles with KEYLESS-GO*:
̈
Disconnect battery negative lead from
̈
Make sure the vehicle’s on-board
negative terminal g.
electronics have status 0.
Make sure the negative lead does not
come into contact with the positive
lead.
With the driver’s door opened, the
vehicle’s on-board electronics
have status 0, same as SmartKey
removed from the starter
Battery, shown removed for illustration
b Battery ventilation hose
h Vent plug
̈
̈
Remove the cover from positive
terminal f.
switch (୴ page 41).
୴୴
!
The battery, battery ventilation hose b,
and vent plug h must always be securely
Disconnect battery positive lead from
positive terminal f.
installed when the vehicle is in operation.
̈
Carry out step 11 (୴ page 509) to
reconnect the battery .
509
| Categories | Mercedes-Benz Manuals, Mercedes-Benz R-Class Manuals |
|---|---|
| Tags | Mercedes Benz R350, Mercedes Benz V251, Mercedes-Benz R320 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)