Practical hints
Replacing bulbs
Notes on bulb replacement
Have the LEDs and bulbs for the following
lamps replaced by an authorized
Mercedes-Benz Light Truck Center:
Warning!
G
ț
ț
ț
ț
ț
Only use 12-volt bulbs of the same type
and with the specified watt rating.
Bulbs and bulb sockets can be very hot.
Allow the lamp to cool down before chang-
ing a bulb.
ț
the additional turn signal lamps in the
exterior rear view mirrors
Switch the lights off before changing a
bulb to prevent short circuits.
ț
ț
ț
the high mounted brake lamp
the Bi-Xenon* low beam lamps
Keep bulbs out of reach of children.
Always use a clean lint-free cloth when
handling bulbs.
Halogen lamps contain pressurized gas.
A bulb can explode if you:
Your hands should be dry and free of oil
and grease.
the Bi-Xenon* high beam flasher spot-
light
ț
ț
ț
touch or move it when hot
drop the bulb
If the newly installed bulb does not
come on, contact an authorized
Mercedes-Benz Light Truck Center.
ț
the front side marker lamps
scratch the bulb
!
Do not replace the bulbs yourself. You could
Wear eye and hand protection.
otherwise damage the LEDs or parts of the
vehicle. Only have the LEDs replaced by an
authorized Mercedes-Benz Light Truck Center.
Because of high voltage in Xenon lamps, it is
dangerous to replace the bulb or repair the
lamp and its components. We recommend
that you have such work done by a qualified
technician.
482
| Categories | Mercedes-Benz Manuals, Mercedes-Benz R-Class Manuals |
|---|---|
| Tags | Mercedes Benz R350, Mercedes Benz V251, Mercedes-Benz R320 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)