Operation
Tires and wheels
i Restart the TPMS after adjusting the tire in- ̈ Press button j or k repeatedly
Warning!
G
the current inflation pressures for each
flation pressure to the inflation pressure recom-
mended for the vehicle operating condition. Tire
pressure should only be adjusted on cold tires.
Observe the recommended tire inflation pres-
sure on the Tire and Loading Information placard
on the driver’s door B-pillar (୴ page 366).
Some vehicles may have supplemental tire infla-
tion pressure information for driving at high
speeds (୴ page 372) or for vehicle loads less
than the maximum loaded vehicle condition
tire appear in the display or the follow-
ing message appears in the display:
Tire pressure
displayed after
driving for
It is the driver’s responsibility to calibrate
the TPMS on the recommended cold infla-
tion pressure. Underinflated tires affect the
ability to steer or brake the vehicle. You
might lose control over the vehicle.
a few minutes.
̈
Press the reset button (୴ page 154).
If you want to set new reference values
manually:
(
can be found on the inside of the fuel filler flap.
୴ page 372). If such information is provided, it
The following message will appear in
the multifunction display:
Restart tire
̈
Using the Tire and Loading Information
placard on the driver’s door B-pillar
̈
Press button è or ÿ on the mul-
tifunction steering wheel repeatedly
until the standard display menu
pressure monitor?
(
୴ page 366) or, if available, the sup-
plemental tire inflation pressure
information on the inside of the fuel
filler flap (୴ page 352), make sure the
tire inflation pressure of all four tires is
correct.
appears in the multifunction display
(
୴ page 164).
382
| Categories | Mercedes-Benz Manuals, Mercedes-Benz R-Class Manuals |
|---|---|
| Tags | Mercedes Benz R350, Mercedes Benz V251, Mercedes-Benz R320 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)