Operation
Vehicle care
When taking the vehicle through an auto-
matic conveyor type car wash, observe the
following instructions.
Vehicles with SmartKey:
̈ Depress the brake pedal.
̈
With the vehicle at a standstill and the
ignition switched on shift the
automatic transmission to neutral
position N.
̈ Shift the automatic transmission to
neutral position N.
G
̈
̈
Release the brake pedal.
Warning!
If engaged, release the parking brake
̈
If engaged, release the parking brake
(
୴ page 56).
When leaving the SmartKey or SmartKey
with KEYLESS-GO* in the starter switch, do
not leave children unattended in the vehicle.
It is possible for children to switch on the
ignition which could result in unsupervised
use of vehicle equipment.
A child’s unsupervised access to a vehicle
could result in an accident and/or serious
personal injury.
(
୴ page 56).
̈
Switch off the ignition and leave the
SmartKey with KEYLESS-GO* in the
starter switch.
̈ Switch off the ignition and leave the
SmartKey in the starter switch.
Vehicles with KEYLESS-GO*:
i After running the vehicle through an auto-
matic car wash, wipe any wax off of the wind-
shield (୴ page 409). This will prevent smears
and reduce wiping noise which can be caused by
residual wax on the windshield.
̈
With the vehicle at a standstill, depress
the brake pedal and keep it pressed.
̈
With the ignition switched on shift the
automatic transmission to park
position P.
When leaving the car wash, make sure that the
mirrors are folded out. Otherwise they may
vibrate.
̈
̈
Release the brake pedal.
Remove the KEYLESS-GO* start/stop
button from the starter switch
(
୴ page 41).
̈
̈
Insert the SmartKey with
KEYLESS-GO* into the starter switch.
Switch on the ignition.
406
| Categories | Mercedes-Benz Manuals, Mercedes-Benz R-Class Manuals |
|---|---|
| Tags | Mercedes Benz R350, Mercedes Benz V251, Mercedes-Benz R320 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)