Controls in detail
Driving systems
Activating Distronic
ț
when the automatic transmission is set
to position P, R, or N
You can activate Distronic when the vehi-
cle speed is between 20 mph (30 km/h)
and 110 mph (180 km/h).
ț
ț
if the ESP
if the ESP
®
is switched off
®
has switched off due to a
When Distronic is activated the standard
display in the multifunction display will
show a message such as
malfunction
Setting the current speed
DISTRONIC 55 MPH.
̈
Accelerate or decelerate to the desired
speed.
If Distronic has not been activated after
pressing the cruise control lever, you will
see the message DISTRONIC Off in the
multifunction display.
1
2
Setting current or higher speed
Adjustment in 1 mph increments (to
the resistance point) or 5 mph
increments (past the resistance point)
(Canada: 1 km/h or 10 km/h)
Setting current or lower speed
Adjustment in 1 mph increments (to
the resistance point) or 5 mph
increments (past the resistance point)
(Canada: 1 km/h or 10 km/h)
Deactivating Distronic
̈
Briefly lift the cruise control lever in
direction of arrow 1 or depress in
direction of arrow 2 (୴ page 268).
In the following cases you cannot activate
Distronic:
Distronic is activated and the current
speed is set.
ț
up to 2 minutes after starting the
engine
The currently set speed appears in the
status indicator of the multifunction
display.
ț
ț
when you brake
3
4
when you have set the parking brake
̈ Remove your foot from the accelerator
pedal.
Activating Distronic or resuming to last
set speed
268
| Categories | Mercedes-Benz Manuals, Mercedes-Benz R-Class Manuals |
|---|---|
| Tags | Mercedes Benz R350, Mercedes Benz V251, Mercedes-Benz R320 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)