Practical hints
What to do if …
Lamps in instrument cluster
General information:
If any of the following lamps in the instru-
ment cluster fails to come on during the
bulb self-check when switching on the
ignition, have the respective bulb checked
and replaced if necessary.
Problem
Possible cause/consequence
Suggested solution
-
The yellow ABS indicator lamp
comes on while the engine is
running.
ABS has detected a malfunction and has
̈ Continue driving with added caution.
®
switched off. The BAS and the ESP are also Wheels may lock during hard braking,
reducing steering capability.
switched off (see messages in multifunction
display).
̈
Read and observe messages in the
The brake system is still functioning normally
but without the ABS available.
multifunction display (୴ page 427).
̈
Have the system checked at an
authorized Mercedes-Benz Light
Truck Center as soon as possible.
If the ABS control unit is malfunctioning,
other systems such as the navigation
system* or the automatic transmission may
also be malfunctioning.
Failure to follow these instructions
increases the risk of an accident.
The charging voltage has fallen below
When the voltage is above this value
again, the ABS is operational again and
10
volts. The ABS has switched off.
The battery might not be charged sufficiently. the ABS indicator lamp should go out.
If the ABS indicator lamp does not go out:
̈
Have the generator (alternator) and
the battery checked.
414
| Categories | Mercedes-Benz Manuals, Mercedes-Benz R-Class Manuals |
|---|---|
| Tags | Mercedes Benz R350, Mercedes Benz V251, Mercedes-Benz R320 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)