Video
199
Vehicle Equipment
Do not use discs with a diameter of 8 cm,
even with an adapter. Only use round discs
with a diameter of 12 cm.
i This Operator’s Manual describes all
features, standard or optional, potentially
available for your vehicle at the time of
purchase. Please be aware that your
vehicle might not be equipped with all
features described in this manual.
Notes on the Care of Discs
ROnly hold discs by the edge.
RHandle discs with care in order to prevent
malfunctions during playback.
RAvoid scratching, leaving fingerprints and
dust on the discs.
RClean the discs occasionally with a
commercially available cleaning cloth.
Always wipe in a straight line from the
inside outwards, never in a circular motion.
Automatic Picture Switch-off
The video picture is only displayed if the
gearshift lever is in “P” position.
When the gearshift lever is moved out of the
“P” position, the following message is
displayed:In order not to distract
you from the traffic situation, the
picture is faded out while the
vehicle is in motion.
RThe discs must only be labelled using pens
specially designed for this purpose.
RAfter use, replace the discs into the sleeve.
When the gearshift lever is moved back into
the “P” position, the picture switches back
on.
RProtect the discs from heat and direct
sunlight.
DVD Playback Conditions
Notes on Storage Media
Some DVDs may not comply with the NTSC
i When playing copied discs, problems may or PAL TV playback standards. Sound, picture
occur with the playback. A wide variety of and other playback problems may occur
disc-writing software and writers are
available. Due to this variety we cannot
guarantee that the system will be able to
play discs that you have written/copied
yourself.
when you play such DVDs.
As standard, COMAND can play video DVDs
which meet the following criteria:
RRegion code 1 or region code 0 (all regions)
i With a video DVD having another region
code, a corresponding message will be
displayed.
!
Do not affix stickers or labels to the discs,
as they could peel off and damage
COMAND. Stickers can cause the disc to
bend, which can result in read errors and
disc recognition problems.
RPAL or NTSC TV standard
Information on this can usually be found
either on the DVD itself or on the DVD sleeve.
!
COMAND is designed to hold discs which
comply with the EN 60908 standard. You
can therefore only use discs with a
maximum thickness of 1.3 mm.
i The factory setting for COMAND is region
code 1. An authorized Mercedes-Benz
Center can change this setting up to five
times. This will enable you to play video
DVDs with other region codes, provided
that they have been made to the PAL or
NTSC TV standard.
If you insert thicker discs, e.g. those that
contain data on both sides (DVD on one
side and audio data on the other), they
cannot be ejected and can damage
COMAND.
Z
| Categories | Mercedes-Benz Manuals, Mercedes-Benz SLS-Class Manuals |
|---|---|
| Tags | Mercedes Benz C197 |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)