Fuses
417
Leave the engine running under all
circumstances.
Removing the SmartKey from the starter
switch or opening a door with the ignition
switched off will automatically shift the into switch off malfunctioning power circuits.
park position P.
Fuses
Introduction
The electrical fuses in your vehicle serve to
If a fuse is blown, the components and
X Start the engine (Y page 259).
X With the vehicle at a standstill, depress the
brake pedal and keep it pressed.
X Shift the transmission into neutral position
N.
X Check the transmission position in the
instrument cluster (Y page 265).
X Release the brake pedal.
systems secured by that fuse will stop
operating.
G Warning!
Only use fuses approved by Mercedes-Benz
with the specified amperage for the system in
question and do not attempt to repair or
bridge a blown fuse. Using other than
approved fuses or using repaired or bridged
fuses may cause an overload leading to a fire,
and/or cause damage to electrical
X If engaged, release the electronic parking
brake.
components and/or systems. Have the cause
determined and remedied by an authorized
Mercedes-Benz Center.
X Switch on the hazard warning flasher
(
Y page 252).
X Leave the engine running throughout the
entire towing procedure.
A blown fuse must be replaced by an
appropriate spare fuse (recognizable by its
color or the fuse rating given on the fuse) of
the amperage recommended in the fuse
chart. Any Mercedes-Benz Center will be glad
!
distances up to 30 miles (50 km) and at a
speed not to exceed 30 mph (50 km/h).
The vehicle may be towed only for
!
Make sure the electronic parking brake is to advise you on this subject.
released. If the electronic parking brake is
malfunctioning, contact an authorized
Mercedes-Benz Center.
i In case of a blown fuse contact Roadside
Assistance or an authorized Mercedes-
Benz Center.
!
While towing, check the temperature of
the transmission fluid via the control
If a newly inserted fuse blows again, have the
cause determined and rectified by an
authorized Mercedes-Benz Center.
The fuse chart is located in the trunk with the
vehicle tool kit (Y page 362). The fuse chart
explains the fuse allocation and fuse
amperages.
system in the AMG menu. The transmission
fluid temperature may not rise above 248‡
(120†).
Otherwise, the towing procedure
must be stopped immediately.
i While being towed with the hazard
warning flasher in use, use the combination
switch in the usual manner to signal turns.
Only the selected turn signal will operate.
Upon canceling the turn signal, the hazard
warning flasher will operate again.
Before replacing fuses
X Engage the electronic parking brake.
X Make sure the transmission is in park
position P.
X Switch off all electrical consumers.
X Turn off the engine.
Z
| Categories | Mercedes-Benz Manuals, Mercedes-Benz SLS-Class Manuals |
|---|---|
| Tags | Mercedes Benz C197 |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)