Wheel change
409
: Wheel bolt
X Insert the wheel bolts and tighten them
slightly.
X Unscrew the alignment bolt.
X Clean contact surfaces of wheel and wheel
hub.
X Install the last wheel bolt and tighten it
slightly.
X Lower the vehicle by turning the crank
counterclockwise until the vehicle is
resting fully on its own weight.
X Remove the jack.
!
against hub and hold it there while
installing first wheel bolt.
To avoid paint damage, place wheel flat
!
The rim could strike the ceramic
composite brake disk when removing and
attaching the wheel. The ceramic
composite brake disk could be damaged.
Exercise appropriate care and have a
second person assist you if possible or use
a second alignment bolt.
Tighten the five wheel bolts evenly, following
the diagonal sequence illustrated (: toA),
until all bolts are tight. Observe a tightening
torque of 96 lb-ft (130 Nm).
X Guide the wheel onto the alignment bolt
and push it on.
G Warning!
Have the tightening torque checked after
changing a wheel. The wheels could come
loose if they are not tightened to a torque of
96
lb-ft (130 Nm).
X Fully collapse the jack, with handle folded
in (storage position), see (Y page 363).
X Store the jack and the other vehicle tools
in the designated storage space.
Z
| Categories | Mercedes-Benz Manuals, Mercedes-Benz SLS-Class Manuals |
|---|---|
| Tags | Mercedes Benz C197 |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)