Control system
285
position$ orc, the daytime running
lamps are switched on when the engine is
running.
In low ambient light conditions the following
lamps will come on additionally:
The settingLevel 10 represents the darkest
level and settingLevel 100 the brightest
level. The brightness is switched off at setting
Level 0.
Switching locator lighting on or off
RLow-beam headlamps
With theLocator Lighting: function
activated and the exterior lamp switch in
positionc
RParking lamps
RTail lamps
RLicense plate lamps
RSide marker lamps
For more information on the daytime running
Rthe exterior lamps will come on during
darkness when the vehicle is unlocked with
the SmartKey.
The lamps will go out when the driver’s door
is opened.
If you do not open the driver’s door after
unlocking the vehicle with the SmartKey,
the lamps will go out automatically after
approximately 40 seconds.
lamp mode, see (Y page 251).
i Make sure the exterior lamp switch is set
toM orc when you switch off the
daytime running lamps while driving at
night.
For safety reasons, resetting all the functions
of all submenus to the factory settings while
driving (Y page 282) will not deactivate the
daytime running lamp mode.
The following message appears in the
multifunction display:
Rthe exterior lamps will remain on for
15
seconds during darkness after exiting
the vehicle and closing all doors.
If, after turning off the engine, you do not
open or close a door, the lamps will
automatically go out after 60 seconds.
The following lamps will come on
RParking lamps
Cannot Be Completely Reset to
Factory Settings while Driving. .
Adjusting illumination brightness for
display and switches
Use this function to adjust the brightness of
the multifunction display and switches.
RTail lamps
RLicense plate lamps
RSide marker lamps
X Press button= or; to select the
Settings menu.
X Press button: or9 to select the
Lights submenu.
X Press buttona.
X Press button: or9 to select the
Locator Lighting: function.
The current settingEnabled orDisabled
is shown.
X Press button= or; to select the
Settings menu.
X Press button: or9 to select the
Lights submenu.
X Press buttona.
X Press button: or9 to set the
Brightness Display/Switches: .
Z
| Categories | Mercedes-Benz Manuals, Mercedes-Benz SLS-Class Manuals |
|---|---|
| Tags | Mercedes Benz C197 |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)