232
STARTINGANDOPERATING
differentfeelingorresponseduringnormaloperationin
D (Drive) position. If the transmission becomes hot
enough the TRANS TEMP warning light in the instru-
ment cluster will come on.After the transmission cools
down,itwillreturntonormaloperation.
CAUTION!
•
Never press on the accelerator pedal with the
engine running, vehicle in gear, and the brakes
applied. Always apply the brakes when stopped
on a incline. Failure to follow these instructions
can cause overheating and damage to the trans-
mission.
TorqueConverterClutch
A feature designed to improve fuel economy has been
added to the automatic transmission of this vehicle. A
clutchwithinthetorqueconverterengagesautomatically
atcalibratedspeeds.Thismayresultinaslightlydiffer-
entfeelingorresponseduringnormaloperationinhigh
gear. When the vehicle speed drops or during accelera-
tion,theclutchautomaticallyandsmoothlydisengages.
•
When “rocking” a stuck vehicle by moving be-
tween “First” and R (Reverse), do not spin the
wheelsfasterthan15mph(24km/h),ordrivetrain
damagemayresult.
OverTemperatureMode
NOTE:
The transmission electronics constantly monitor the
transmissionoiltemperature.Ifthetransmissiongetstoo
hot,thetransmissionwillchangethewayitshiftstohelp
control the condition. This may result in a slightly
• untilThe torquethe transmissionconverter clutchfluid and(TCC)enginewill notcoolantengageare
warm(usuallyafter1–3miles(1.6–4.8km)ofdriving)
andthevehiclespeedisaboveapproximately30mph
| Categories | Jeep Liberty Manuals, Jeep Manuals |
|---|---|
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)