Workshop maintenance
POWER STEERINGPUMP DRIVEBELT
V8 engine
(with air-conditioning)
Check the belt deflection with thumb pressure,
mid-waybetween the crankshaft and steering
pump pulleys. Movement should be between
4
and 6 mm (0.16 and 0.25 in). If adjustment
is necessary;
•
•
Slacken the two steering pump pivot bolts
(4).
Move the steering pump in the required
direction to achieve the correct tension.
WARNING
DONOTlever, or apply pressure to the pump
body to tension the belt, as damage to the
pump may occur.
•
•
Turn the starter switch to position ’0’and
disconnect the batterynegative lead.
•
Tighten the pump adjustment clamp bolt
(3).
Slacken the alternator adjustment link
clamp and pivot bolts (2) (see ’Alternator
drive belt - V8 engine with
•
•
Tighten the two pump pivot bolts (4).
air-conditioning’).
Adjust the alternator drive belt (see
’Alternator drive belt - V8 engine with
air-conditioning’).
•
Slacken the steering pump adjustment
clamp bolt (3).
•
•
Connect the battery, run the engine for five
minutes at a fast idle and then switch off.
Re-checkboth steering pump and
alternator belt tension.
146
| Categories | Land Rover, Land Rover Defender 110, Land Rover Defender 130, Land Rover Defender 90 |
|---|---|
| Tags | Land Rover |
| Model Year | 1997 |
| Download File |
|
| Language | English |
| Product Name | Defender 90, 110, 130 |
| Product Brand | Land Rover |
| Applicable to Country | Australia |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)