Workshop maintenance
TRANSFER GEARBOXOILRENEWAL
•
•
Clean and refit the plug with a new
washer. Tighten to a torque of 30 Nm (23
lbf/ft).
WARNING
Remove the filler levelplug (3) and inject
the correct grade of oil (see ’Generaldata’)
until it begins to run from the hole.
For safety, DONOTwork underneath the
vehicle unless it is safely parked with the
wheels chocked, or is supported by heavy
duty stands.
WARNING
Extreme care should be taken when draining
gearbox oil, it may be hot and cause severe
scalding.
Use only NEWoil - DONOTuse oil
previously drained from the system.
Ensure the vehicle is parked on firm, level
ground and chock the wheels. Place a suitable
container under the gearboxto catch the used
oil.
•
•
Clean and refit the filler levelplug. Tighten
to a torque of 30 Nm (23 lbf/ft).
Wipe any surplus oil from the area and
remove the wheel chocks.
•
•
Clean the area surrounding the drain plug
and filler level(3) plug, to prevent
contamination of the gearbox.
(2)
Remove the drain plug (2) and allow the
oil to drain completely.
151
| Categories | Land Rover, Land Rover Defender 110, Land Rover Defender 130, Land Rover Defender 90 |
|---|---|
| Tags | Land Rover |
| Model Year | 1997 |
| Download File |
|
| Language | English |
| Product Name | Defender 90, 110, 130 |
| Product Brand | Land Rover |
| Applicable to Country | Australia |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)