THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
17
Sentry Keyா Programming
4. Insert a blank Sentry Key into the ignition switch.
If you have two valid Sentry Keys, you can program Turn the ignition switch to the ON position within
new Sentry Keys to the system by performing the 60seconds.After10seconds,asinglechimewillsound.
followingprocedure:
CuttheadditionalSentryKeyTransponderblank(s)
tomatchtheignitionswitchlockcylinderkeycode.
Insertthefirstvalidkeyintotheignitionswitch.Turn
the ignition switch to the ON position for at least three
seconds, but no longer than 15 seconds. Then, turn the
ignitionswitchtotheLOCKpositionandremovethefirst
key.
Inaddition,theVehicleSecurityLightwillstopflashing. 2
Toindicatethatprogrammingiscomplete,theindicator
lightwillturnonagainforthreesecondsandthenturn
off.
1.
2.
The new Sentry Key has been programmed. The Re-
mote Keyless Entry (RKE) transmitter will also be
programmed during this procedure. Repeat this proce-
duretoprogramuptoatotalofeightkeys.Ifyoudonot
have a programmed Sentry Key, contact your autho-
3.
Insert the second valid key into the ignition switch. rizeddealerfordetails.
Turn the ignition switch to the ON position within
NOTE: Ifaprogrammedkeyislost,seeyourauthorized
dealer to have all remaining keys erased from the sys-
temsmemory.Thiswillpreventthelostkeyfromstarting
15
seconds. After 10 seconds, a chime will sound. In
addition, the Vehicle Security Light will begin to flash.
Turn the ignition switch to the LOCK position and
removethesecondkey.
| Categories | Chrysler Manuals |
|---|---|
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)