16
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
Customer Key Programming
4. Insert a blank Sentry Key into the ignition switch.
If you have two valid Sentry Keys, you can program Turn the ignition switch to the ON position within
new Sentry Keys to the system by performing the 60seconds.After10seconds,asinglechimewillsound.
followingprocedure:
CuttheadditionalSentryKeyTransponderblank(s)
tomatchtheignitionswitchlockcylinderkeycode.
Insertthefirstvalidkeyintotheignitionswitch.Turn
the ignition switch to the ON position for at least three
seconds, but no longer than 15 seconds. Then, turn the
ignitionswitchtotheLOCKpositionandremovethefirst
key.
Inaddition,theVehicleSecurityLightwillstopflashing.
To indicate that programming is complete, the Vehicle
Security Light will turn on again for three seconds and
thenturnoff.
1.
2.
The new Sentry Key is programmed. The Remote
Keyless Entry (RKE) transmitter will also be pro-
grammedduringthisprocedure.
Repeatthisproceduretoprogramuptoeightkeys.Ifyou
do not have a programmed Sentry Key, contact your
authorizeddealerfordetails.
3.
Insert the second valid key into the ignition switch.
Turn the ignition switch to the ON position within
15
seconds. After 10 seconds, a chime will sound. In NOTE: Ifaprogrammedkeyislost,seeyourauthorized
addition, the Vehicle Security Light will begin to flash. dealer to have all remaining keys erased from the sys-
Turn the ignition switch to the LOCK position and tem’s memory. This will prevent the lost key from
removethesecondkey.
starting your vehicle. The remaining keys must then be
| Categories | Jeep Manuals, Jeep Wrangler Manuals |
|---|---|
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)