CONTROLS AND EQUIPMENT1
43
B265C01LZ-AAT
B260F01A-AAT
HighBeamIndicatorLight
If this happens, stop the car as
soon as it is safe to do so, turn off
the engine and check the oil level. If
the oil level is low, fill engine oil to
the proper level and start the en-
gine again. If the light stays on with
the engine running, turn the engine
off immediately. In any instance
where the oil light stays on when
the engine is running, the engine
should be checked by an Hyundai
authorised repairers before the car
is driven again.
Electronic Stability
Program Indicator Lights
(If installed)
The high beam indicator light comes
on whenever the headlights are
switched to the high beam or flash
position.
The electronic stability program indi-
cators change operation according to
theignitionswitchpositionandwhether
the system is in operation or not.
They will illuminate when the ignition
key is turned to the "ON" position, but
should go out after three seconds. If
the ESP or ESP-OFF indicator stays
on, take your car to your authorized
Hyundai dealer and have the system
checked. See section 2 for more infor-
mation about the ESP.
B260G01A-AAT
Low Oil Pressure Warn-
ing Light
!
CAUTION:
If the oil pressure warning light
stays on whilst the engine is run-
ning, serious engine damage may
result. The oil pressure warning
light comes on whenever there is
insufficient oil pressure. In normal
operation, it should come on when
the ignition switch is turned on,
then go out when the engine is
started.
If the oil pressure warning light
stays on whilst the engine is run-
ning, there is a serious malfunc-
tion.
jmuk-1a.p65
43
5/31/04, 4:36 PM
| Categories | Hyundai Manuals, Hyundai Tucson Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Tucson |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)