6 OWNERMAINTENANCE
32
HEADLIGHT AIMING
ADJUSTMENT
NOTE:
G290A02O-EAT
Before performing aiming adjustment,
make sure of the following.
Vertical
aiming
It is recommended that water ac-
cumulated in the fuel filter should
be removed by Hyundai authorised
repairer.
Horizontal
aiming
1.
2.
Keep all tyres inflated to the cor-
rect pressure.
Place the vehicle on level ground
and press the front bumper & rear
bumper down several times. Place
the vehicle at a distance of 118.1in.
!
WARNING:
Be sure to carefully wipe away any
water drained out in this manner,
because the fuel mixed in the wa-
ter might be ignited and result in a
fire.
(3,000
mm) from the test wall.
3.
See that the vehicle is unloaded
(except for full levels of coolant,
engine oil and fuel, and spare tyre,
jack, and tools). Have the driver or
equivalent weight placed in driver's
seat.
G290A01JM
6.
Draw the vertical line (through the
centre of each headlight) and the
horizontal line (through the centre
of each headlight) on the aiming
screen.
And then, draw a parallel line at
1.18 in.(30 mm) under the horizon-
tal line.
4.
5.
Clean the headlights lenses and
turn on the headlights (Low beam).
Open the bonnet.
7.
8.
Adjust each cut-off line of the low
beam to the parallel line with a
phillips screwdriver - VERTICAL
AIMING
Adjust each cut-off line of the low
beam to the each vertical line with
a phillips screwdriver - HORIZON-
TAL AIMING.
jmuk-6.p65
32
5/31/04, 4:49 PM
| Categories | Hyundai Manuals, Hyundai Tucson Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Tucson |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)