OWNERMAINTENANCE 6
19
1.
Open the bonnet, being careful to
keep hands and clothing clear of
any moving parts.
!
WARNING (Diesel only):
Fluid level should be within "HOT" range
Never work on injection system
with engine running or within 30
seconds after shutting off engine.
High pressure pump, rail, injec-
tors and high pressure pipes are
subject to high pressure even af-
ter the engine stopped. The fuel jet
produced by fuel leaks may cause
serious injury, if it contacts the
body. People using pacemakers
should ensure that they keep a
distance of 30cm from the ECU or
wiring harness within the engine
room while engine is running,
since the high currents in the Com-
mon Rail system produce consid-
erable magnetic fields.
HJM5044
3.
If the transaxle fluid level is low,
use a funnel to add transaxle fluid
through the dipstick tube until the
level reaches the "HOT" range. Do
not overfill.
HJM5011
2.
Remove the transaxle dipstick, wipe
it clean, reinsert the dipstick as far
as it will go, then remove it again.
Now check the fluid level on the
dipstick. It should be in the "HOT"
range on the dipstick.
!
WARNING:
The electric engine cooling fan
automatically switches on and off
according to engine temperature.
Be careful to keep away from the
fan during this check as it may
switch on at any time.
NOTE:
Only lint free cloth should be used
for wiping the dipstick. The pres-
ence of lint within the transaxle
may cause problems with the nor-
mal function of the transaxle.
jmuk-6.p65
19
5/31/04, 4:48 PM
| Categories | Hyundai Manuals, Hyundai Tucson Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Tucson |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)