8 CONSUMERINFORMATION
4
YI010A1-E
TYRE ROTATION
SI060A1-E
TYRE BALANCING
SI060B1-E
TYRE REPLACEMENT
Incorrect tyre balance will cause steer-
ing vibration and uneven tyre wear.
The vehicle tyres are balanced during
production but may need further bal-
ancing throughout the life of the tyres.
It is recommended that the tyres be
balanced on the car for best results
and that the tyres are balanced when-
ever they have been removed from
the wheel for repair.
0.06 in. (1.6 mm)
Wear indicator
Spare tyre
I060A01JM
HJM5031
NOTE:
Tyre wear will vary for each wheel. In
order to increase the life of each tyre
and keep wear uniform, tyre rotation
should be performed every 10,000
miles as shown in figure.
Tyres must be replaced when the
wear indicators appear as a solid bar
across the tyre tread. At this point,
the remaining tread depth will be ap-
proximately 0.06 in.(1.6 mm). In ad-
dition to this, the tyre must be re-
placed if any portion of the tread has
become bald or if there are any lumps,
bulges or deep cuts in the sidewalls
or tread.
Should abnormal wear be noted
on a tyre, then it is recommended
that the wheel alignment be
checked
by
your
Hyundai
authorised repairer at the earliest
opportunity.
!
WARNING:
Do not mix cross-ply and radial-
ply under any circumstances. This
may cause dangerous handling
characteristics.
Replacement tyres must be of the
recommended size and rating and
should be of the same manufacture
and tread pattern on each axle.
jmuk-8.p65
4
5/31/04, 4:44 PM
| Categories | Hyundai Manuals, Hyundai Tucson Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Tucson |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)