CONTROLS AND EQUIPMENT1
47
B260V01JM-GAT
4WD Lock Indicator Light
B260E01HP-GAT
Seat Belt Reminder Light
B260U01TB-EAT
Immobiliser Warning
Light
(If installed)
4
WD(FourWheelDrive)lockindicator
The seat belt reminder light blinks for
about 6 seconds when the ignition key
is turned from the "OFF" position to
"ON" or "START".
This warning light comes on for some
seconds after the ignition key is turned
to the "ON" position. At this time, you
canstarttheengine.Thelightgoesout
after the engine is running. In case this
light goes out before you start the
engine, you must turn to the "LOCK"
positionandrestarttheengine.Incase
this light blinks for five seconds when
the ignition key is turned to "ON" posi-
tion, this indicates that the immobiliser
system is out of order. At this time,
consult to the Hyundai authorised re-
pairer.
light in the instrument cluster is illumi-
nated when the 4WD lock switch is
pushed.
The purpose of this switch is to in-
crease the drive power when driving
on dry road surface, wet pavement
snow-covered roads and/or off-road.
B260Q01E-GAT
Cruise Indicator Light
(If installed)
4WDlockindicatorlightisturnedoffby
pushing the switch once again
The cruise indicator light in the instru-
ment cluster is illuminated when the
cruise control main switch on the end
of the barrel is pushed.
The indicator light does not illuminate
when the cruise control main switch is
pushed a second time.
!
CAUTION:
Do not use 4WD lock switch on dry
paved roads or highway, it can
cause noise, vibration or damage
of 4WD related parts.
Information about the use of cruise
control is beginning on page 1-81.
jmuk-1a.p65
47
5/31/04, 4:36 PM
| Categories | Hyundai Manuals, Hyundai Tucson Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Tucson |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)